Skip to Content
Merck
CN
  • Stability of a highly concentrated solution of epirubicin for conventional transcatheter arterial chemoembolization.

Stability of a highly concentrated solution of epirubicin for conventional transcatheter arterial chemoembolization.

International journal of pharmaceutics (2015-10-11)
Youssef Bennis, Amandine Savry, Florian Correard, Marc Montana, Christophe Sauzet, Laurence Gauthier-Villano, Pascale Pisano, Bertrand Pourroy
ABSTRACT

Epirubicin is widely used for conventional transcatheter arterial chemoembolization (cTACE) in patients with hepatocellular-carcinoma. However, there is no data about its stability in solution at concentration higher than 2 mg/L, yet needed when mixing it with a standard volume of Lipiodol(®) to produce an efficient water-in-oil emulsion. The aim of this study was therefore to evaluate the stability of a highly concentrated solution of epirubicin for cTACE and verify whether epirubicin solution could be prepared in advance. Fifty milligrams of epirubicin were dissolved in 6 mL of 0.9% sodium chloride and conditioned in brown polypropylene syringe. Physical and chemical stability assays including particles and HPLC-DAD analysis were performed in triplicate, using series of 5 syringes stored over 72 h at 4±2 °C followed by 4h at 22±4°C. Neither weight loss nor pH or spectrum change occurred. No haze or turbidity was observed and the number of subvisible particles was below the recommended limits. Epirubicin concentration remained above 95% of the initial value over the 72 h of storage at +4 °C followed by 4h at 22±4 °C and no degradation was observed. Epirubicin at 50mg/6 mL in 0.9% NaCl conditioned in brown propylene syringe is stable for at least 72 h at 4±2 °C with additional 4h at 22±4 °C allowing its preparation in advance for programmed cTACE and the standardization of its use in clinical practice.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Sodium chloride, 99.999% trace metals basis
Sigma-Aldrich
Sodium chloride, random crystals, 99.9% trace metals basis
Sigma-Aldrich
Phosphoric acid solution, suitable for NMR (reference standard), 85% in D2O (99.9 atom % D), NMR tube size 4.2 mm × 8 in. , WGS-5BL Coaxial NMR tube
Sigma-Aldrich
Epirubicin hydrochloride, ≥90% (HPLC)
Sigma-Aldrich
Sodium chloride solution, 0.85%
Sigma-Aldrich
Sodium chloride-35Cl, 99 atom % 35Cl
Sigma-Aldrich
Phosphoric acid solution, 85 wt. % in H2O, FCC, FG
Supelco
Methyl Paraben, PESTANAL®, analytical standard
Sigma-Aldrich
Phosphoric acid solution, suitable for NMR (reference standard), 85% in D2O (99.9 atom % D), NMR tube size 3 mm × 8 in.
Sigma-Aldrich
Phosphoric acid solution, suitable for NMR (reference standard), 85% in D2O (99.9 atom % D), NMR tube size 5 mm × 8 in.
Sigma-Aldrich
Hydrogen peroxide solution, 34.5-36.5%
Sigma-Aldrich
Sodium chloride, AnhydroBeads, −10 mesh, 99.999% trace metals basis
Sigma-Aldrich
Sodium chloride solution, 5 M
Sigma-Aldrich
Sodium chloride, Molecular Biology, DNase, RNase, and protease, none detected, ≥99% (titration)
Sigma-Aldrich
Sodium chloride, meets analytical specification of Ph. Eur., BP, USP, 99.0-100.5%
Sigma-Aldrich
Sodium chloride, tablet
Sigma-Aldrich
Sodium chloride, BioReagent, suitable for cell culture, suitable for insect cell culture, suitable for plant cell culture, ≥99%
Sigma-Aldrich
Sodium chloride solution, 0.9% in water, BioXtra, suitable for cell culture
Sigma-Aldrich
Sodium chloride, BioXtra, ≥99.5% (AT)
Sigma-Aldrich
Sodium chloride solution, 5 M in H2O, BioReagent, Molecular Biology, suitable for cell culture
Sigma-Aldrich
Sodium chloride, BioUltra, Molecular Biology, ≥99.5% (AT)
Sigma-Aldrich
Sodium chloride solution, BioUltra, Molecular Biology, ~5 M in H2O
Sigma-Aldrich
Sodium chloride, BioPerformance Certified, ≥99% (titration), suitable for insect cell culture, suitable for plant cell culture
Sigma-Aldrich
Hydrogen peroxide solution, contains inhibitor, 35 wt. % in H2O
Sigma-Aldrich
Hydrogen peroxide solution, contains ~200 ppm acetanilide as stabilizer, 3 wt. % in H2O
Sigma-Aldrich
Sodium chloride, Vetec, reagent grade, 99%
Sigma-Aldrich
Acetonitrile, Preparateur, ≥99.9% (GC), One-time steel-plastic (SP) drum
Sigma-Aldrich
Phosphoric acid-16O4 solution, 70 wt. % in D2O, 99.9 atom % 16O
Sigma-Aldrich
Hydriodic acid, distilled, 57 wt. %, 99.999% trace metals basis
Sigma-Aldrich
Potassium phosphate monobasic, 99.99% trace metals basis