产品名称
Millipak® Final Fill 60 Durapore®, Inlet: 1/4 in. Hose Barb Outlet: 1/4 in. Hose Barb Vent: 1/8 in. Hose Barb
Quality Level
material
PVDF membrane, polysulfone housing, silicone O-ring
reg. compliance
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility
sterile
product line
Millipak® Final Fill
feature
hydrophilic
manufacturer/tradename
Durapore®
parameter
0.7 bar max. differential pressure (10 psid) at 25 °C (Reverse), 1.7 bar max. differential pressure (25 psid) at 80 °C (Forward), 5.5 bar max. differential pressure (80 psid) at 25 °C (Forward)
technique(s)
sterile filtration: suitable
filter diam.
7.6 cm (3.0 in.)
filtration area
300 cm2
impurities
<0.25 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
matrix
Durapore®
pore size
0.1 μm pore size
bubble point
≥70 psi (4830 mbar), air with water at 23 °C
fitting
6 mm (1/4 in.) inlet hose barb, 6 mm (1/4 in.) outlet hose barb
Other Notes
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer general guidelines section of user guide shipped with this product
- Storage Statement: Please refer user guide shipped with this product
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations
Legal Information
法规信息
此项目有
使用 Emprove® 计划保持符合 GMP 要求
使用Emprove® Dossiers可加快资格认证、保持合规性并节省时间。
注意：您将进入 EmproveSuite.com。您的用户名和密码与 SigmaAldrich.com 是分开的，可能不同。
免费注册，几分钟内即可访问 Emprove® Dossiers。 升级您的订阅计划，解锁 Emprove® Suite 中的高级定制内容。
没有找到您要找的内容？访问 Emprove® 计划帮助页面。
全球贸易项目编号
| 货号 | GTIN |
|---|---|
| MFVL06SH3 | 04054839378508 |