跳转至内容
Merck
CN

主要文件

查看所有文档

MPGL06CF3

Millipak® 60 Capsule Media: Durapore® 0.22 µm

Chemistry: Hydrophilic Polyvinylidene Fluoride (PVDF) Inlet: 3/4 in. Sanitary Flange Outlet: 3/4 in. Sanitary Flange

别名:

Millipak®囊式过滤器，带Durapore® 0.22 µm滤膜

登录 查看组织和合同定价。

选择尺寸

变更视图

关于此项目

UNSPSC Code:
23151806
技术服务
需要帮助？我们经验丰富的科学家团队随时乐意为您服务。
让我们为您提供帮助

产品名称

Millipak -60 灌装机过滤单元 0.22 µm 3/4 in.TC/TC, Chemistry: Hydrophilic Polyvinylidene Fluoride (PVDF) Inlet: 3/4 in. Sanitary Flange Outlet: 3/4 in. Sanitary Flange

Quality Segment

400

material

PVDF membrane, polycarbonate housing, PVDF vent cap, polycarbonate support

sterility

sterile

sterilization compatibility

gamma compatible
x-ray compatible

product line

Millipak®

feature

hydrophilic

manufacturer/tradename

Durapore®

parameter

4.1 bar max. differential pressure (60 psid) at 25 °C (Forward), 0.35 bar max. differential pressure (5 psid) at 123 °C (Forward), 0.7 bar max. differential pressure (10 psid) at 25 °C (Reverse), 1.7 bar max. differential pressure (25 psid) at 80 °C (Forward)

technique(s)

sterile filtration: suitable

filter diam.

7.6 cm (3.0 in.)

filtration area

300 cm2

inlet connection diam.

3/4 in.

outlet connection diam.

3/4 in.

impurities

<0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)

gravimetric extractables

≤2 mg/device

matrix

Durapore®

pore size

0.22 μm

bubble point

≥3450 mbar (50 psig), air with water at 23 °C

fitting

19 mm (3/4 in.) inlet sanitary flange, 19 mm (3/4 in.) outlet sanitary flange

General description

Device Configuration: 取样皿滤膜
Number of stacked discs: 60 discs

Packaging

Double Easy-Open bag

Preparation Note

Sterilization Method
3 autoclave cycles of 90 min @ 123°C; not in-line steam sterilizable
This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Analysis Note

Bacterial Retention
Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
使用 ≥200 mL 水冲洗后，将符合“USP 氧化物检测”要求
Gravimetric Extractables: after 24 hours in water at controlled room temperature

Other Notes

Directions for Use

  • Organism Retention: Microorganism
  • Mode of Action: Filtration (size exclusion)
  • Application: BioProcessing
  • Intended Use: Reduction or removal of microorganism/bioburden
  • Instructions for Use: Please refer Wetting Instructions for Filter Units with Durapore® Membrane user guide
  • Storage Statement: Store in dry location
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Legal Information

ASTM is a registered trademark of American Society for Testing and Materials
Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany

Still not finding the right product?

Explore all of our products under Millipak -60 灌装机过滤单元 0.22 µm 3/4 in.TC/TC

使用 Emprove® 计划保持符合 GMP 要求

使用Emprove® Dossiers可加快资格认证、保持合规性并节省时间。

下载 Dossiers

注意：您将进入 EmproveSuite.com。您的用户名和密码与 SigmaAldrich.com 是分开的，可能不同。

免费注册，几分钟内即可访问 Emprove® Dossiers。 升级您的订阅计划，解锁 Emprove® Suite 中的高级定制内容。

没有找到您要找的内容？访问 Emprove® 计划帮助页面。

已有该产品？

在文件库中查找您最近购买产品的文档。

访问文档库