CN
Search Within
200336
应用筛选条件
关键词:'200336'
显示 1-30 共 85 条结果 关于 "200336" 范围 论文
Xinhua Li et al.
Medical physics, 40(3), 031903-031903 (2013-03-08)
In multidetector CT, the dose integral DIL of single scan dose profile over the integration interval (-L/2, L/2) can predict the accumulated dose DL(0) at the center of the scan range (-L/2, L/2) for a helical scan of pitch =
Pleural infection 55 years after plombage for pulmonary tuberculosis.
Qian-kun Chen et al.
Asian cardiovascular & thoracic annals, 21(1), 100-100 (2013-02-23)
Hidekazu Yamazaki et al.
Journal of bioscience and bioengineering, 118(4), 455-460 (2014-04-20)
Microwell chip culture is a promising technique for the generation of homogenous spheroids. We investigated the relationship between the structure of the bottom surface of microwell chip and the properties of HepG2 spheroid. We developed a microwell chip, the bottom
O Savabi et al.
The European journal of prosthodontics and restorative dentistry, 21(3), 105-108 (2013-11-23)
The purpose of this study was to evaluate the effect of chemical disinfectants on flexural strength of denture base acrylic resins. A total of 176 rectangular specimens (65x10x3 mm) were made from four heat-polymerized acrylic resins (Triplex,QC-20, Meliodent and Acropars)
Simulated body fluid and water absorption effects on poly (methyl methacrylate)/hydroxyapatite denture base composites.
Tham WL, et al.
Express Polymer Letters, 4(9), 517-528 (2010)
Tim Van Hoeylandt et al.
Journal of chromatography. A, 1342, 63-69 (2014-04-15)
Peaks eluting from a size exclusion separation (SEC) are often not completely baseline-separated due to the inherent dispersity of the polymer. Lowering the flow rate is sometimes a solution to obtain a better physical separation, but results in a longer
C J Gutowski et al.
The bone & joint journal, 96-B(1), 65-69 (2014-01-08)
The rate of peri-prosthetic infection following total joint replacement continues to rise, and attempts to curb this trend have included the use of antibiotic-loaded bone cement at the time of primary surgery. We have investigated the clinical- and cost-effectiveness of
J Mason et al.
Medical physics, 40(3), 031717-031717 (2013-03-08)
In permanent seed implant prostate brachytherapy the actual dose delivered to the patient may be less than that calculated by TG-43U1 due to interseed attenuation (ISA) and differences between prostate tissue composition and water. In this study the magnitude of
Jan-Hendrik Klein-Wiele et al.
Optics express, 21(7), 9017-9023 (2013-04-11)
A novel technique is introduced that dramatically increases the quality and spatial resolution of directly ablated periodic nanostructures on materials. The presented method utilizes a PMMA confinement layer spin coated on the surface of the ablated material reducing the violence
Jian-Chiun Liou et al.
Nanoscale research letters, 9(1), 1-1 (2014-01-02)
In this study, the Mo-electrode thin films were deposited by a two-stepped process, and the high-purity copper indium selenide-based powder (CuInSe2, CIS) was fabricated by hydrothermal process by Nanowin Technology Co. Ltd. From the X-ray pattern of the CIS precursor
Jonathan A Kadouch et al.
Dermatologic surgery : official publication for American Society for Dermatologic Surgery [et al.], 39(10), 1474-1485 (2013-10-05)
To evaluate factors influencing the onset and type of adverse events in patients injected with permanent fillers in the face and to propose a therapeutic strategy for these complications. A prospectively attained series of 85 patients with delayed-onset complications after
Luís Marcos Cerdeira Ferreira et al.
Biosensors & bioelectronics, 47, 539-544 (2013-05-07)
This paper describes the development of a microfluidic system having as main component an enzymatic reactor constituted by a microchannel assembled in poly(methyl methacrylate) (PMMA) substrate connected to an amperometric detector. A CO2 laser engraving machine was used to make
Guillem Bori et al.
The Journal of arthroplasty, 29(5), 883-888 (2013-11-26)
This study assesses the factors associated with the dislocation of the Spacer-G and its clinical prognosis. Seventy-four spacers were reviewed. Acetabular bone defects, proximal femoral cementation of the spacer and its relationship to the size of the head spacer were
A Demčenko et al.
Ultrasonics, 54(2), 684-693 (2013-10-08)
Elastic wave mixing using an immersion method has shown effective monitoring and scanning capabilities when applied to thermoplastic ageing, epoxy curing, and non-destructive testing. In water, excitation and reception of waves do not require physical contact between the tools and
Lucía D Garza-García et al.
Lab on a chip, 13(7), 1243-1246 (2013-02-16)
We report a proof-of-principle for the use of micro-devices as continuous bioreactors for the production of monoclonal antibodies. We culture CHO cells on the surface of PMMA "zigzag" channels textured with semi-spherical cavities coated with fibronectin, observing steady-state productivities 100
Gursukhman S Sidhu et al.
Journal of neurosurgery. Spine, 19(1), 61-70 (2013-05-07)
The authors endeavor to highlight the surgical management of severe neurological deficit resulting from cement leakage after percutaneous vertebroplasty and to systematically review the literature on the management of this complication. A patient presented after a vertebroplasty procedure for traumatic
Teerthesh Jain et al.
The journal of contemporary dental practice, 14(1), 80-83 (2013-04-13)
The purpose of this study was to evaluate and compare the flexural strength of commercially available acrylic (trevalone) and modified polymethylmethacrylate (PMMA). Four groups were tested; Group 1- control group regular MMA, group 2-2% methacrylic acid, 88% MMA, group 3-16%
Ali Dirani et al.
Journal of refractive surgery (Thorofare, N.J. : 1995), 30(4), 266-271 (2014-04-08)
To evaluate the safety and clinical outcomes of non-topography-guided photorefractive keratectomy (PRK) for the treatment of residual mild refractive errors 6 months after sequential intracorneal ring segment (ICRS) implantation and corneal collagen cross-linking (CXL) in stable keratoconus. This retrospective study
Nicolas Zydziak et al.
Macromolecular rapid communications, 34(8), 672-680 (2013-03-19)
Single-walled carbon nanotubes (SWCNTs) are pre-functionalized with a pyridinyl-based dithioester to undergo a hetero Diels-Alder (HDA) reaction with cyclopentadienyl end-capped poly(methyl)methacrylate (Mn = 2700 g mol(-1) , PDI = 1.14). Fourier transform infrared spectroscopy, thermogravimetric analysis, elemental analysis (EA), and
Sudheer D Rani et al.
Analytica chimica acta, 770, 103-110 (2013-03-19)
This paper presents a numerical study to investigate the effect of geometrical and material transition on the flow and progression of a sample plug in electrokinetic flows. Three cases were investigated: (a) effect of sudden cross-sectional area change (geometrical transition
Bone cement embolism attached to central venous catheter.
J A Khan
British journal of anaesthesia, 114(2), 351-351 (2015-01-18)
High-refractive-index thin films prepared from trialkoxysilane-capped poly (methyl methacrylate)-titania materials
Lee LH and Chen WC
Chemistry of Materials, 13(3), 1137-1142 null
Lizz van der Heijden et al.
The Journal of bone and joint surgery. American volume, 95(21), e159-e159 (2013-11-08)
It has been suggested that, when a patient has a giant cell tumor, subchondral bone involvement close to articular cartilage and a hyperthermic reaction from polymethylmethacrylate (PMMA) are risk factors for the development of osteoarthritis. We determined the prevalence, risk
S A Bini et al.
The bone & joint journal, 95-B(3), 367-370 (2013-03-02)
We evaluated the impact of pre-coating the tibial component with polymethylmethacrylate (PMMA) on implant survival in a cohort of 16 548 primary NexGen total knee replacements (TKRs) in 14 113 patients. In 13 835 TKRs a pre-coated tray was used
Transparent conductive electrodes."
Yu K and Chen J
Material Matters, 9(1), 6-6 null
Ana Sofia Gomes et al.
The International journal of prosthodontics, 28(1), 65-71 (2015-01-15)
The purpose of this study was to evaluate, in situ, the initial adhesion of microorganisms to as well as the surface roughness and chemical composition of ProBase Hot (Ivoclar Vivadent), a hard acrylic resin, and Vertex Soft (Vertex-Dental), an acrylic-based
Kariem Mostafa Al Batouty et al.
The journal of adhesive dentistry, 15(2), 161-166 (2013-03-28)
To compare the push-out bond strength of a new glass fiber root canal filling material to that of Resilon/ Epiphany, EndoREZ, and gutta-percha/AH Plus root canal filling materials. Sixty roots were randomly divided into four groups (n = 15) according
Jwala Karnik et al.
Journal of the American Academy of Dermatology, 71(1), 77-83 (2014-04-15)
Acne scarring remains a stubborn clinical problem. Few treatments have been shown to be definitely effective for this problem. Polymethylmethacrylate (PMMA) microspheres in collagen (ArteFill, Suneva Medical Inc, Santa Barbara, CA) have shown long-term benefit for nasolabial fold treatment. A pilot
Hazards of bone cement: for patient and operating theatre personnel.
C Kakazu et al.
British journal of anaesthesia, 114(1), 168-169 (2014-12-17)
Luis Alberto Cordova et al.
Clinical science (London, England : 1979), 127(5), 277-293 (2014-05-16)
Aseptic loosening as a result of wear debris is considered to be the main cause of long-term implant failure in orthopaedic surgery and improved biomaterials for bearing surfaces decreases significantly the release of micrometric wear particles. Increasingly, in-depth knowledge of
1/3