跳转至内容
Merck
CN
  • Formation of dimethylketene and methacrolein by reaction of the CH radical with acetone.

Formation of dimethylketene and methacrolein by reaction of the CH radical with acetone.

Physical chemistry chemical physics : PCCP (2013-02-14)
Fabien Goulay, Adeeb Derakhshan, Eamonn Maher, Adam J Trevitt, John D Savee, Adam M Scheer, David L Osborn, Craig A Taatjes
摘要

The reaction of the methylidyne radical (CH) with acetone ((CH(3))(2)C[double bond, length as m-dash]O) is studied at room temperature and at a pressure of 4 Torr (533.3 Pa) using a multiplexed photoionization mass spectrometer coupled to the tunable vacuum ultraviolet synchrotron radiation of the Advanced Light Source at Lawrence Berkeley National Laboratory. The CH radicals are generated by 248 nm multiphoton photolysis of bromoform and react with acetone in an excess of helium and nitrogen gas flow. The main observed reaction exit channel is elimination of a hydrogen atom to form C(4)H(6)O isomers. Analysis of photoionization spectra identifies dimethylketene and methacrolein as the only H-elimination products. The best fit to the data gives branching ratios of 0.68 ± 0.14 for methacrolein and 0.32 ± 0.07 for dimethylketene. A methylketene spectrum measured here is used to reanalyze the photoionization spectrum obtained at m/z = 56 for the CH + acetaldehyde reaction, (Goulay et al., J. Phys. Chem. A, 2012, 116, 6091) yielding new H-loss branching ratios of 0.61 ± 0.12 for acrolein and 0.39 ± 0.08 for methylketene. The contribution from methyleneoxirane to the reaction product distribution is revised to be negligible. Coupled with additional product detection for the CD + acetone reaction, these observations pave the way for development of general set of reaction mechanisms for the addition of CH to compounds containing an acetyl subgroup.

材料
产品编号
品牌
产品描述

Sigma-Aldrich
丙酮, ACS reagent, ≥99.5%
Sigma-Aldrich
丙酮, suitable for HPLC, ≥99.9%
Sigma-Aldrich
丙酮, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%
Sigma-Aldrich
丙酮, Laboratory Reagent, ≥99.5%
Sigma-Aldrich
丙酮, suitable for HPLC, ≥99.8%
Sigma-Aldrich
丙酮, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.5% (GC)
Sigma-Aldrich
丙酮, ACS reagent, ≥99.5%
Supelco
丙酮, analytical standard
Sigma-Aldrich
丙酮, histological grade, ≥99.5%
Supelco
丙酮, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
2-甲基丙烯醛, 95%
Sigma-Aldrich
溴仿, contains 60-120 ppm 2-methyl-2-butene as stabilizer, 99%
Sigma-Aldrich
丙酮, puriss., meets analytical specification of Ph. Eur., BP, NF, ≥99% (GC)
Sigma-Aldrich
丙酮, ≥99%, FCC, FG
Sigma-Aldrich
丙酮, natural, ≥97%
Sigma-Aldrich
溴仿, contains 1-3% ethanol as stabilizer, 96%
Supelco
溴仿 溶液, certified reference material, 5000 μg/mL in methanol
Supelco
溴仿, amylene stabilized, analytical standard