跳转至内容
Merck
CN
  • New modular manganese(I) tricarbonyl complexes as PhotoCORMs: in vitro detection of photoinduced carbon monoxide release using COP-1 as a fluorogenic switch-on probe.

New modular manganese(I) tricarbonyl complexes as PhotoCORMs: in vitro detection of photoinduced carbon monoxide release using COP-1 as a fluorogenic switch-on probe.

Dalton transactions (Cambridge, England : 2003) (2014-04-26)
Sandesh Pai, Maryam Hafftlang, George Atongo, Christoph Nagel, Johanna Niesel, Svetlana Botov, Hans-Günther Schmalz, Benito Yard, Ulrich Schatzschneider
摘要

Five manganese(i) tricarbonyl complexes of the general formulae [Mn(bpea(N=CHC6H4R))(CO)3]PF6 and [Mn(bpea(NHCH2C6H4R))(CO)3]PF6 based on the tridentate bis(pyrazolyl)ethylamine (bpea) ligand, each containing a pendant 4-substituted phenyl group with R = H, I, and C≡C-H, were synthesized and fully characterized, including X-ray structure analysis for three compounds. All complexes are stable in the dark in aqueous buffer for an extended period of time. However, CO-release could be triggered by illumination at 365 nm, establishing these compounds as novel photoactivatable CO-releasing molecules (PhotoCORMs). The influence of the imine vs. amine group in the ligands on the electronic structure and the photophysical behavior was investigated with the aid of DFT and TDDFT calculations. Solution IR studies on selected compounds allowed identification of intermediates resulting from the photoreaction. Finally, light-induced CO release from a model compound was demonstrated both in PBS buffer and in vitro in human umbilical vein endothelial cells (HUVECs) using COP-1 as a fluorescent switch-on probe.

材料
产品编号
品牌
产品描述

Sigma-Aldrich
乙二胺四乙酸, ACS reagent, 99.4-100.6%, powder
Sigma-Aldrich
乙二胺四乙酸, anhydrous, crystalline, BioReagent, suitable for cell culture
Sigma-Aldrich
乙二胺四乙酸 溶液, 0.02% in DPBS (0.5 mM), sterile-filtered, BioReagent, suitable for cell culture
Sigma-Aldrich
乙二胺四乙酸 二钠盐 溶液, BioUltra, pH 8.0, ~0.5 M in H2O
Sigma-Aldrich
乙二胺四乙酸, 99.995% trace metals basis
Sigma-Aldrich
乙二胺四乙酸, BioUltra, anhydrous, ≥99% (titration)
Sigma-Aldrich
锰, powder, ≥99.9% trace metals basis
Sigma-Aldrich
乙二胺四乙酸, purified grade, ≥98.5%, powder
Sigma-Aldrich
乙二胺四乙酸, ≥98.0% (KT)
Sigma-Aldrich
乙二胺四乙酸, BioUltra, ≥99.0% (KT)
Sigma-Aldrich
锰, chips, thickness <2.0 mm, 99%
锰, foil, 25x25mm, thickness 2mm, hot-pressed, 99.95%
锰, foil, 50x50mm, thickness 2mm, hot-pressed, 99.95%
锰, foil, not light tested, 25x25mm, thickness 0.025mm, permanent polyester support, 98.7%
Sigma-Aldrich
乙二胺四乙酸, Vetec, reagent grade, 98%
锰, rod, 10mm, diameter 4.0mm, cast, 99.5%
锰, rod, 50mm, diameter 4.0mm, cast, 99.5%
锰, foil, not light tested, 50x50mm, thickness 0.006mm, permanent polyester support, 98.7%
锰, foil, not light tested, 50x50mm, thickness 0.015mm, permanent polyester support, 98.7%
锰, foil, not light tested, 25x25mm, thickness 0.005mm, permanent polyester support, 98.7%
锰, foil, not light tested, 50x50mm, thickness 0.025mm, permanent polyester support, 98.7%
锰, foil, not light tested, 50x50mm, thickness 0.004mm, permanent polyester support, 98.7%
锰, foil, not light tested, 50x50mm, thickness 0.005mm, permanent polyester support, 98.7%
锰, foil, not light tested, 50x50mm, thickness 0.007mm, permanent polyester support, 98.7%
锰, foil, not light tested, 25x25mm, thickness 0.0025mm, permanent polyester support, 98.7%
锰, foil, not light tested, 25x25mm, thickness 0.008mm, permanent polyester support, 98.7%
锰, foil, not light tested, 50x50mm, thickness 0.02mm, permanent polyester support, 98.7%
锰, foil, not light tested, 50x50mm, thickness 0.05mm, permanent polyester support, 98.7%
锰, foil, not light tested, 25x25mm, thickness 0.002mm, permanent polyester support, 98.7%
锰, foil, not light tested, 25x25mm, thickness 0.01mm, permanent polyester support, 98.7%