Merck
CN
  • Nanocasting of carbon films with interdigitated bimodal three-dimensionally ordered mesopores by template-replica coassembly.

Nanocasting of carbon films with interdigitated bimodal three-dimensionally ordered mesopores by template-replica coassembly.

Langmuir : the ACS journal of surfaces and colloids (2014-09-25)
Zheng Tian, Mark A Snyder
摘要

Carbon films with interdigitated bimodal three-dimensionally ordered mesoporosity (ib3DOm) are realized by a scalable nanoreplication process that removes the common need plaguing hard-templating strategies for multistep prefabrication of porous sacrificial templates. Specifically, evaporation-induced convective codeposition of size-tunable (ca. 20-50 nm) silica nanoparticles with a surrogate molecular carbon precursor (glucose), followed by carbonization and template etching, leads to remarkably ordered, crack-free mesoporous carbon films of tunable thickness (ca. 100-1000 nm) and pore size. Association of the molecular carbon precursor with the assembling pore forming particles is found to transition the system among three distinct film morphologies (collapsed, ib3DOm C, disordered), thereby establishing a pseudophase behavior controlled by silica solids content and incipient glucose concentration. Namely, a parametric window wherein ib3DOm C films can be realized is identified, with a diffuse lower phase boundary associated with collapsing carbon films, and a more distinct order-to-disorder transition encountered at higher glucose concentrations. Mechanistic insight suggests that glucose association with the lysine-silica nanoparticle surface modulates the lattice spacing, d, of the periodically ordered mesopores in the coassembled films, with the onset of the order-to-disorder transition occurring at a critical normalized lattice spacing, dc/D ∼ 1.16. This appears to apply across the phase space associated with D = 50 nm silica particles and to translate among other phase spaces associated with smaller particles (e.g., 30 nm). We briefly demonstrate the robustness of the codeposition process for realizing ib3DOm C films on rough FTO glass substrates and show that, in this form, these materials hold potential as low-cost alternatives to costly platinum electrodes for dye-sensitized solar cells.

材料
货号
品牌
产品描述

Sigma-Aldrich
硫酸, ACS reagent, 95.0-98.0%
Sigma-Aldrich
氢氧化钾, ACS reagent, ≥85%, pellets
Sigma-Aldrich
硫酸, 99.999%
Sigma-Aldrich
氢氧化钾, reagent grade, 90%, flakes
Sigma-Aldrich
氢氧化钾, pellets, reag. Ph. Eur., ≥85%
Millipore
过氧化氢 溶液, 3%, suitable for microbiology
Sigma-Aldrich
L -赖氨酸, ≥98% (TLC)
Sigma-Aldrich
氢氧化钾 溶液, 45 wt. % in H2O
Sigma-Aldrich
氢氧化钾, semiconductor grade, pellets, 99.99% trace metals basis (Purity excludes sodium content.)
Sigma-Aldrich
氢氧化钾, ≥85% KOH basis, pellets, white
Sigma-Aldrich
硫酸, puriss. p.a., for determination of Hg, ACS reagent, reag. ISO, reag. Ph. Eur., 95.0-97.0%
Supelco
硫酸浓缩液, 0.1 M H2SO4 in water (0.2N), eluent concentrate for IC
Sigma-Aldrich
过氧化氢 溶液, 34.5-36.5%
Supelco
氢氧化钾 溶液, volumetric, 8.0 M KOH (8.0N)
Sigma-Aldrich
氢氧化钾, technical, ≥85%, powder
Sigma-Aldrich
氢氧化钾, BioXtra, ≥85% KOH basis
Sigma-Aldrich
过氧化氢 溶液, contains ~200 ppm acetanilide as stabilizer, 3 wt. % in H2O
Sigma-Aldrich
硫酸, puriss., meets analytical specification of Ph. Eur., BP, 95-97%
Sigma-Aldrich
L -赖氨酸, crystallized, ≥98.0% (NT)
Sigma-Aldrich
氢氧化钾, anhydrous, ≥99.95% trace metals basis
Sigma-Aldrich
糖精, ≥98%
Supelco
氢氧化钾溶液, 0.1 M KOH in water (0.1N), Eluent concentrate for IC
Supelco
L -赖氨酸, analytical standard
Supelco
Mettler-Toledo 校准物质 ME 51143091,糖精, traceable to primary standards (LGC)
Sigma-Aldrich
过氧化氢 溶液, contains inhibitor, 35 wt. % in H2O
Sigma-Aldrich
糖精, ≥99%
Sigma-Aldrich
氧化锡(II), ≤60 micron particle size, powder, 97%
Sigma-Aldrich
氢氧化钾, puriss., meets analytical specification of Ph. Eur., BP, 85-100.5%, pellets
Supelco
糖精钠, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
氧化锡(II), 99.99% trace metals basis