跳转至内容
Merck
CN
  • Wurtzite Cu₂GeS₃ Nanocrystals: Phase- and Shape-Controlled Colloidal Synthesis.

Wurtzite Cu₂GeS₃ Nanocrystals: Phase- and Shape-Controlled Colloidal Synthesis.

Chemistry, an Asian journal (2015-05-02)
Parthiban Ramasamy, Jinkwon Kim
摘要

The first colloidal synthesis of Cu2 GeS3 (CGS) nanocrystals with a thermodynamically metastable wurtzite crystal phase is reported. As a benefit of the sulfur precursors used in the synthesis, the shape of the as-synthesized wurtzite CGS nanocrystals can be controlled in the form of spherical nanoparticles, nanorectangles, and hollow nanorectangles. A detailed investigation into the effects of reaction conditions necessary to obtain phase-pure wurtzite CGS nanocrystals is presented. The choice of sulfur precursor and precursor injection temperature play a significant role in determining the crystal phase of the CGS nanocrystals. The band gap of the new wurtzite phase CGS was measured to be 1.76 eV and the CGS nanocrystals exhibited a good electrochemical photoresponse, which was indicative of their potential application as an active layer in the field of solar cells.

材料
产品编号
品牌
产品描述

Sigma-Aldrich
硫, powder, 99.98% trace metals basis
Sigma-Aldrich
硫, 99.998% trace metals basis
Sigma-Aldrich
N,O-双(三甲基甲硅烷基)乙酰胺, synthesis grade, ≥95%
Sigma-Aldrich
氯化亚铜, ≥99.995% trace metals basis
Sigma-Aldrich
碳纳米纤维, graphitized, platelets(conical), >98% carbon basis, D × L 100 nm × 20-200 μm
Sigma-Aldrich
碳纳米纤维, pyrolitically stripped, platelets(conical), >98% carbon basis, D × L 100 nm × 20-200 μm
Sigma-Aldrich
碳,介孔, less than 100 ppm Al, Ti, Fe, Ni, Cu, and Zn combined
Sigma-Aldrich
碳,介孔, nanopowder, less than 500 ppm Al, Ti, Fe, Ni, Cu, and Zn combined
Sigma-Aldrich
碳,介孔
Sigma-Aldrich
石墨化碳, nanopowder, graphitized, less than 250 ppm Al, Ti, Fe, Ni, Cu, and Zn combined
Sigma-Aldrich
氯化亚铜, AnhydroBeads, ≥99.99% trace metals basis
Sigma-Aldrich
硫, flakes, ≥99.99% trace metals basis
Sigma-Aldrich
碳,介孔, hydrophilic pore surface
Sigma-Aldrich
甲烷-12C, 13C-去除, 99.9 atom % 12C
Carbon - Vitreous, rod, 100mm, diameter 5.0mm, glassy carbon
Carbon - Vitreous, foam, 150x150mm, thickness 2.5mm, bulk density 0.05g/cm3, porosity 96.5%
Carbon - Vitreous, foil, 25x25mm, thickness 0.5mm, glassy carbon
Carbon - Vitreous, rod, 100mm, diameter 3.0mm, glassy carbon
Carbon - Vitreous, rod, 5mm, diameter 3.0mm, glassy carbon
Carbon - Vitreous, foam, 150x150mm, thickness 3.2mm, bulk density 0.05g/cm3, porosity 96.5%
Carbon - Vitreous, tube, 100mm, outside diameter 10mm, inside diameter 3mm, wall thickness 3.5mm, glassy carbon
Carbon - Vitreous, rod, 50mm, diameter 1.0mm, glassy carbon
Carbon - Vitreous, foam, 150x150mm, 0.05g.cmué, porosity 96.5%, 24 pores/cm
Carbon - Vitreous, foil, 50x50mm, thickness 1.0mm, glassy carbon
Carbon - Vitreous, foil, 10x10mm, thickness 1.0mm, glassy carbon
Carbon - Vitreous, rod, 200mm, diameter 1.0mm, glassy carbon
Carbon - Vitreous, rod, 200mm, diameter 5.0mm, glassy carbon
Carbon - Vitreous, foil, 10x10mm, thickness 4.0mm, glassy carbon
Carbon - Vitreous, tube, 50mm, outside diameter 10mm, inside diameter 3mm, wall thickness 3.5mm, glassy carbon
Carbon - Vitreous, rod, 100mm, diameter 1.0mm, glassy carbon