GC Analysis of Volatiles in Kentucky Bourbon (Sample 2) on VOCOL® after SPME using 50/30 μm DVB/Carboxen®/PDMS Fiber
CONDITIONS
sample preparation
Solid Phase Microextraction
sample/matrix
4 mL Kentucky bourbon (sample 2, 100 proof) in a 10 mL vial (no salt added)
SPME fiber
50/30 μm divinylbenzene/Carboxen®/polydimethylsiloxane on StableFlex™ (57298-U)
extraction
headspace, 40 °C for 15 min with agitation
desorption process
270 °C for 3 min
column
VOCOL®, 30 m x 0.25 mm I.D., 1.50 μm (24205-U)
oven
40 °C (2.5 min), 6 °C/min to 55 °C, 45 °C/min to 235 °C (5min)
inj. temp.
270 °C
detector
FID, 300 °C
carrier gas
helium, 1.0 mL/min
injection
splitless (closed 0.75 min)
liner
0.75 mm I.D., direct (SPME) type, straight design
说明
分析说明
Beverages are liquid, so sample preparation is often simple, and can be accomplished with direct injection, headspace, solid phase microextraction (SPME), solid phase extraction (SPE), or liquid-liquid extraction (LLE). SPME coupled with GC is an effective technique for monitoiring the volatiles present in the headspace over spirits.
法律信息
Carboxen is a registered trademark of Merck KGaA, Darmstadt, Germany
StableFlex is a trademark of Sigma-Aldrich Co. LLC
VOCOL is a registered trademark of Merck KGaA, Darmstadt, Germany