跳转至内容
Merck
CN
  • Chiral separations by HPLC on immobilized polysaccharide chiral stationary phases.

Chiral separations by HPLC on immobilized polysaccharide chiral stationary phases.

Methods in molecular biology (Clifton, N.J.) (2013-01-04)
Imran Ali, Zeid A Al-Othman, Hassan Y Aboul-Enein
摘要

Immobilized polysaccharide chiral stationary phases (CSPs) are a new development in chiral chromatography with increasing importance for the resolution of racemic compounds. These CSPs can be used with solvents traditionally applied for the classical coated polysaccharide CSPs as well as solvents that were "forbidden" for the coated phases such as tetrahydrofuran, chloroform, dichloromethane, acetone, 1,4-dioxane, ethylacetate, and certain ethers. However, these forbidden solvents may be required for the determination of the chiral recognition mechanism. Therefore, the immobilized CSPs are effective for the evaluation of chiral recognition mechanisms. Furthermore, immobilized chiral columns are also useful for monitoring the progress of stereospecific synthetic reactions which are normally performed in such solvents. The present chapter describes the detailed experimental protocol of a chiral resolution on immobilized polysaccharides CSPs by HPLC.

材料
产品编号
品牌
产品描述

Sigma-Aldrich
四氢呋喃, inhibitor-free, suitable for HPLC, ≥99.9%
Sigma-Aldrich
二氯甲烷, suitable for HPLC, ≥99.8%, contains amylene as stabilizer
Sigma-Aldrich
二氯甲烷, contains 40-150 ppm amylene as stabilizer, ACS reagent, ≥99.5%
Sigma-Aldrich
二氯甲烷, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains 50-150 ppm amylene as stabilizer
Sigma-Aldrich
四氢呋喃, contains 200-400 ppm BHT as inhibitor, ACS reagent, ≥99.0%
Sigma-Aldrich
四氢呋喃, anhydrous, ≥99.9%, inhibitor-free
Sigma-Aldrich
二氯甲烷, anhydrous, ≥99.8%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
四氢呋喃, anhydrous, contains 250 ppm BHT as inhibitor, ≥99.9%
Sigma-Aldrich
1,4-二氧六环, ACS reagent, ≥99.0%, contains ≤25 ppm BHT as stabilizer
Sigma-Aldrich
1,4-二氧六环, anhydrous, 99.8%, contains <=25 ppm BHT as stabilizer
Sigma-Aldrich
1,4-二氧六环, suitable for HPLC, ≥99.5%
Sigma-Aldrich
二氯甲烷, puriss. p.a., ACS reagent, reag. ISO, ≥99.9% (GC)
Sigma-Aldrich
1,4-二氧六环, ACS reagent, ≥99.0%, contains <=25 ppm BHT as stabilizer
Sigma-Aldrich
二氯甲烷, ACS reagent, ≥99.5%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
四氢呋喃, ≥99.0%, contains 200-400 ppm BHT as inhibitor, ReagentPlus®
Sigma-Aldrich
四氢呋喃, contains 250 ppm BHT as inhibitor, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥99.9%
Sigma-Aldrich
二氯甲烷, puriss., meets analytical specification of Ph. Eur., NF, ≥99% (GC)
Sigma-Aldrich
1,4-二氧六环, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.5% (GC)
Sigma-Aldrich
四氢呋喃, ACS reagent, ≥99.0%, contains 200-400 ppm BHT as inhibitor
Supelco
二氯甲烷, analytical standard
Sigma-Aldrich
1,4-二氧六环, ReagentPlus®, ≥99%, contains ≤25 ppm BHT as stabilizer
Supelco
1,4-二氧六环, analytical standard
Sigma-Aldrich
二氯甲烷, ACS reagent, ≥99.5%, contains 40-150 ppm amylene as stabilizer
Supelco
1,4-二氧六环 溶液, certified reference material, 2000 μg/mL in methanol, ampule of 1 mL
Supelco
四氢呋喃, analytical standard
Sigma-Aldrich
二氯甲烷, suitable for HPLC, ≥99.9%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
二氯甲烷, biotech. grade, 99.9%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
1,4-二氧六环 溶液, suitable for NMR (reference standard), 40% in benzene-d6 (99.6 atom % D)
Supelco
四氢呋喃, Selectophore, ≥99.5%
Supelco
二氯甲烷, Selectophore, ≥99.5%