跳转至内容
Merck
CN
  • Local vanadium release from a calcium sulfate carrier accelerates fracture healing.

Local vanadium release from a calcium sulfate carrier accelerates fracture healing.

Journal of orthopaedic research : official publication of the Orthopaedic Research Society (2014-01-01)
David N Paglia, Aaron Wey, Jeremy Hreha, Andrew G Park, Catherine Cunningham, Linda Uko, Joseph Benevenia, J Patrick O'Connor, Sheldon S Lin
摘要

This study evaluated the efficacy of using calcium sulfate (CaSO4 ) as a carrier for intramedullary delivery of an organic vanadium salt, vanadyl acetylacetonate (VAC) after femoral fracture. VAC can act as an insulin-mimetic and can be used to accelerate fracture healing in rats. A heterogenous mixture of VAC and CaSO4 was delivered to the fracture site of BB Wistar rats, and mechanical testing, histomorphometry, micro-computed tomography (micro-CT) were performed to measure healing. At 4 weeks after fracture, maximum torque to failure, effective shear modulus, and effective shear stress were all significantly higher (p < 0.05) in rats treated with 0.25 mg/kg VAC-CaSO4 as compared to carrier control rats. Histomorphometry found a 71% increase in percent cartilage matrix (p < 0.05) and a 64% decrease in percent mineralized tissue (p < 0.05) at 2 weeks after fracture in rats treated with 0.25 mg/kg of VAC-CaSO4 . Micro-CT analyses at 4 weeks found a more organized callus structure and higher trending maximum connected z-ray. fraction for VAC-CaSO4 groups. Evaluation of radiographs and serial histological sections at 12 weeks did not show any evidence of ectopic bone formation. As compared to previous studies, CaSO4 was an effective carrier for reducing the dose of VAC required to accelerate femoral fracture healing in rats.

材料
Product Number
品牌
产品描述

Sigma-Aldrich
Drierite, with indicator, 8 mesh
Sigma-Aldrich
Drierite, with indicator, 10-20 mesh
Sigma-Aldrich
硫酸钙 二水合物, ReagentPlus®, ≥99%
Sigma-Aldrich
硫酸钙, −325 mesh, 99%
Sigma-Aldrich
硫酸钙 半水合物, purum, ≥97.0%
Sigma-Aldrich
硫酸钙 二水合物, ACS reagent, 98%
Sigma-Aldrich
硫酸钙, without indicator, 8 mesh
Sigma-Aldrich
硫酸钙, with indicator, 4 mesh
Sigma-Aldrich
乙酰丙酮酸铜, ≥99.9% trace metals basis
Sigma-Aldrich
硫酸钙, with indicator, 6 mesh
Sigma-Aldrich
乙酰丙酮铬, 97%
Sigma-Aldrich
乙酰丙酮锰(III), technical grade
Sigma-Aldrich
乙酰丙酮锰(II)
Sigma-Aldrich
硫酸钙 二水合物, puriss., meets analytical specification of NF, E 516, 99.0-101.0% (based on anhydrous substance)
Sigma-Aldrich
硫酸钙, ≥99.99% trace metals basis
Sigma-Aldrich
硫酸钙, without indicator, 4 mesh
Sigma-Aldrich
乙酰丙酮酸铜, 97%
Sigma-Aldrich
钒, powder, −325 mesh, 99.5% trace metals basis
Sigma-Aldrich
钒, powder, -100 mesh, 99.9% trace metals basis
Sigma-Aldrich
钒, foil, thickness 0.127 mm, 99.7% trace metals basis
Sigma-Aldrich
钒, pieces, 1-3 mm, 99.9% trace metals basis
钒, wire reel, 1m, diameter 0.5mm, as drawn, 99.8%
钒, wire reel, 0.2m, diameter 0.25mm, hard, 99.8%
钒, microfoil, disks, 10mm, thinness 1.0μm, specific density 611μg/cm2, permanent mylar 3.5μm support, 99.8+%
钒, microfoil, disks, 25mm, thinness 0.1μm, specific density 60.8μg/cm2, permanent mylar 3.5μm support, 99.8+%
钒, wire reel, 1m, diameter 0.25mm, hard, 99.8%
钒, wire reel, 0.2m, diameter 0.5mm, as drawn, 99.8%
钒, wire reel, 0.5m, diameter 0.25mm, hard, 99.8%
钒, microfoil, disks, 25mm, thinness 1.0μm, specific density 611μg/cm2, permanent mylar 3.5μm support, 99.8+%
钒, wire reel, 0.5m, diameter 0.1mm, as drawn, 99.8%