跳转至内容
Merck
CN
  • HPLC-DAD and UV-spectrophotometry for the determination of lychnopholide in nanocapsule dosage form: validation and application to release kinetic study.

HPLC-DAD and UV-spectrophotometry for the determination of lychnopholide in nanocapsule dosage form: validation and application to release kinetic study.

Journal of chromatographic science (2012-12-19)
Renata Tupinambá Branquinho, Vanessa Carla Furtado Mosqueira, Eunice Kazue Kano, Jacqueline de Souza, Diego Dias Ramos Dorim, Dênia Antunes Saúde-Guimarães, Marta de Lana
摘要

Simple and sensitive methods using high-performance liquid chromatography-diode array detection (HPLC-DAD) and ultraviolet (UV)-spectrophotometry were developed and compared to quantify lychnopholide (LYC) in poly-ε-caprolactone nanocapsules and to study its release kinetics. Both methods were validated concerning their specificity, linearity, limits of detection and quantification, precision, accuracy and stability. HPLC-DAD analyses were conducted using an RP C18 column, isocratic elution with a methanol-water (60:40 v/v) mobile phase at 0.8 mL/min flow rate and detection at 265 nm. The linear response (r(2) > 0.999) was obtained within a concentration range of 2-25 µg/mL using HPLC-DAD and 5-40 µg/mL using spectrophotometry. Intra-day and inter-day precision were obtained with low relative standard deviation values. The accuracy of the methods was within the range 98-101% for HPLC-DAD and from 96-100% for UV-spectrophotometry. Both methods were suitable to be applied for the determination of drug loading percentage (>96%) and encapsulation efficiency (>90%). Furthermore, the sensitivity of HPLC-DAD method allows studies of LYC release/dissolution in sink conditions. LYC presented 100% dissolution after 24 h, whereas only 60% of LYC was released from the nanocapsule dosage form, with no burst effect. The methods fulfilled all validation parameters evaluated for LYC quantification in the polymeric nanocapsules and have proven to be accurate, selective and sensitive in the previously mentioned applications.

材料
产品编号
品牌
产品描述

Sigma-Aldrich
甲醇, suitable for HPLC, ≥99.9%
Sigma-Aldrich
丙酮, ACS reagent, ≥99.5%
Sigma-Aldrich
甲醇, ACS reagent, ≥99.8%
Sigma-Aldrich
乙酸乙酯, ACS reagent, ≥99.5%
Sigma-Aldrich
丙酮, suitable for HPLC, ≥99.9%
Sigma-Aldrich
甲醇, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
乙酸乙酯, suitable for HPLC, ≥99.7%
Sigma-Aldrich
丙酮, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%
Sigma-Aldrich
甲醇, HPLC Plus, ≥99.9%
Sigma-Aldrich
丙酮, Laboratory Reagent, ≥99.5%
Sigma-Aldrich
正己烷, suitable for HPLC, ≥97.0% (GC)
Sigma-Aldrich
乙酸乙酯, HPLC Plus, for HPLC, GC, and residue analysis, 99.9%
Sigma-Aldrich
正己烷, ReagentPlus®, ≥99%
Sigma-Aldrich
正己烷, suitable for HPLC, ≥95%
Sigma-Aldrich
甲醇, anhydrous, 99.8%
Sigma-Aldrich
正己烷, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥99% (GC)
Sigma-Aldrich
正己烷, HPLC Plus, for HPLC, GC, and residue analysis, ≥95%
Sigma-Aldrich
甲醇, Laboratory Reagent, ≥99.6%
Sigma-Aldrich
甲醇, suitable for HPLC, gradient grade, suitable as ACS-grade LC reagent, ≥99.9%
Sigma-Aldrich
丙酮, suitable for HPLC, ≥99.8%
Sigma-Aldrich
丙酮, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.5% (GC)
Sigma-Aldrich
甲醇, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8% (GC)
Sigma-Aldrich
甲醇, ACS spectrophotometric grade, ≥99.9%
Sigma-Aldrich
正己烷, Laboratory Reagent, ≥95%
Sigma-Aldrich
对茴香醛, 98%
Sigma-Aldrich
甲醇, ACS reagent, ≥99.8%
Sigma-Aldrich
乙酸乙酯, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.5% (GC)
Sigma-Aldrich
乙酸乙酯, suitable for HPLC, ≥99.8%
Sigma-Aldrich
乙酸乙酯, anhydrous, 99.8%
Sigma-Aldrich
正己烷, anhydrous, 95%