跳转至内容
Merck
CN

Photochemical degradation of Corexit components in ocean water.

Chemosphere (2014-07-07)
Caitlin M Glover, Stephen P Mezyk, Karl G Linden, Fernando L Rosario-Ortiz
摘要

Due to the large quantities of dispersants used during the Deepwater Horizon spill in 2010, there were immediate concerns with regards to the fate and transport of the mixture in ocean waters. Direct and sensitized photolysis experiments were carried out for two compounds chosen as surrogates for the Corexit mixture (9500 and 9527) that were applied to surface waters during the oil spill in the Gulf of Mexico. The results showed that direct photolysis did not contribute significantly to the overall degradation (max ∼30%), therefore the focus shifted to sensitized photolysis, specifically the degradation stemming from the reaction rate with hydroxyl radical (HO). The direct photochemical degradation rates for two of the compounds, dioctyl sulfosuccinate (DOSS) and dipropylene glycol butyl ether (DGBE) were measured as 4.29×10(-6)s(-1) and 5.95×10(-6)s(-1), respectively; whereas the overall degradation rate in ocean water was 1.56×10(-5)s(-1) and 2.23×10(-5)s(-1). The formation rates and apparent quantum yields for HO formation were determined for six ocean water samples. The values ranged from 1.81×10(-5) near shore to 0.061×10(-5) for the open ocean. These degradation rates suggest the possibility for photolysis to play a role in the overall fate of Corexit.

材料
产品编号
品牌
产品描述

Sigma-Aldrich
乙腈, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
甲醇, suitable for HPLC, ≥99.9%
Sigma-Aldrich
甲醇, ACS reagent, ≥99.8%
Sigma-Aldrich
甲醇, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
甲醇, HPLC Plus, ≥99.9%
Sigma-Aldrich
乙腈, ACS reagent, ≥99.5%
Sigma-Aldrich
乙腈, anhydrous, 99.8%
Sigma-Aldrich
苯, suitable for HPLC, ≥99.9%
Sigma-Aldrich
甲醇, anhydrous, 99.8%
Sigma-Aldrich
苯, ACS reagent, ≥99.0%
Sigma-Aldrich
乙腈, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
乙腈, ≥99.9% (GC)
Supelco
苯, analytical standard
Sigma-Aldrich
甲醇, Laboratory Reagent, ≥99.6%
Sigma-Aldrich
甲醇, suitable for HPLC, gradient grade, suitable as ACS-grade LC reagent, ≥99.9%
Sigma-Aldrich
甲醇, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8% (GC)
Sigma-Aldrich
甲醇, ACS spectrophotometric grade, ≥99.9%
Sigma-Aldrich
甲醇, ACS reagent, ≥99.8%
Sigma-Aldrich
苯, anhydrous, 99.8%
Millipore
过氧化氢 溶液, 3%, suitable for microbiology
Sigma-Aldrich
乙腈, suitable for HPLC-GC, ≥99.8% (GC)
Sigma-Aldrich
过氧化氢 溶液, contains ~200 ppm acetanilide as stabilizer, 3 wt. % in H2O
USP
木精, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
甲醇, BioReagent, ≥99.93%
Supelco
甲醇, analytical standard
Sigma-Aldrich
苯, puriss. p.a., reag. Ph. Eur., ≥99.7%
Supelco
甲醇, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
过氧化氢 溶液, contains inhibitor, 35 wt. % in H2O
Sigma-Aldrich
乙腈, biotech. grade, ≥99.93%
Sigma-Aldrich
乙腈, electronic grade, 99.999% trace metals basis