跳转至内容
Merck
CN
  • Polyhydroxybutyrate-co-hydroxyvalerate structures loaded with adipose stem cells promote skin healing with reduced scarring.

Polyhydroxybutyrate-co-hydroxyvalerate structures loaded with adipose stem cells promote skin healing with reduced scarring.

Acta biomaterialia (2015-02-11)
Alessandra Zonari, Thaís M M Martins, Ana Cláudia C Paula, Jankerle N Boeloni, Silviene Novikoff, Alexandra P Marques, Vitor M Correlo, Rui L Reis, Alfredo M Goes
摘要

Currently available skin substitutes are still associated with a range of problems including poor engraftment resulting from deficient vascularization, and excessive scar formation, among others. Trying to overcome these issues, this work proposes the combination of poly(3-hydroxybutyrate-co-hydroxyvalerate) (PHBV) structures with adipose-derived stem cells (ASCs) to offer biomechanical and biochemical signaling cues necessary to improve wound healing in a full-thickness model. PHBV scaffold maintained the wound moisture and demonstrated enough mechanical properties to withstand wound contraction. Also, exudate and inflammatory cell infiltration enhanced the degradation of the structure, and thus healing progression. After 28 days all the wounds were closed and the PHBV scaffold was completely degraded. The transplanted ASCs were detected in the wound area only at day 7, correlating with an up-regulation of VEGF and bFGF at this time point that consequently led to a significant higher vessel density in the group that received the PHBV loaded with ASCs. Subsequently, the dermis formed in the presence of the PHBV loaded with ASCs possesses a more complex collagen structure. Additionally, an anti-scarring effect was observed in the presence of the PHBV scaffold indicated by a down-regulation of TGF-β1 and α-SMA together with an increase of TGF-β3, when associated with ASCs. These results indicate that although PHBV scaffold was able to guide the wound healing process with reduced scarring, the presence of ASCs was crucial to enhance vascularization and provide a better quality neo-skin. Therefore, we can conclude that PHBV loaded with ASCs possesses the necessary bioactive cues to improve wound healing with reduced scarring.

材料
产品编号
品牌
产品描述

Sigma-Aldrich
乙酸, glacial, ACS reagent, ≥99.7%
Sigma-Aldrich
乙酸, glacial, ReagentPlus®, ≥99%
Sigma-Aldrich
氯仿, contains 100-200 ppm amylenes as stabilizer, ≥99.5%
Sigma-Aldrich
氯仿, contains ethanol as stabilizer, ACS reagent, ≥99.8%
Sigma-Aldrich
Triton X-100, laboratory grade
Sigma-Aldrich
地塞米松, powder, BioReagent, suitable for cell culture, ≥97%
Sigma-Aldrich
甲醛 溶液, Molecular Biology, 36.5-38% in H2O
Sigma-Aldrich
甲醛 溶液, ACS reagent, 37 wt. % in H2O, contains 10-15% Methanol as stabilizer (to prevent polymerization)
SAFC
甲醛 溶液, contains 10-15% methanol as stabilizer, 37 wt. % in H2O
Sigma-Aldrich
乙酸, glacial, ≥99.99% trace metals basis
Sigma-Aldrich
乙酸, glacial, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8%
Sigma-Aldrich
乙酸 溶液, suitable for HPLC
Sigma-Aldrich
乙酸, glacial, puriss., meets analytical specification of Ph. Eur., BP, USP, 99.8-100.5%
Sigma-Aldrich
氯仿, contains amylenes as stabilizer, ACS reagent, ≥99.8%
Sigma-Aldrich
氯仿, ACS spectrophotometric grade, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
甲醛 溶液, Molecular Biology, BioReagent, ≥36.0% in H2O (T)
Sigma-Aldrich
氯仿, anhydrous, ≥99%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
吲哚美辛, 98.0-102.0%, meets EP testing specifications
Sigma-Aldrich
氯仿, anhydrous, contains amylenes as stabilizer, ≥99%
Sigma-Aldrich
乙酸, suitable for luminescence, BioUltra, ≥99.5% (GC)
USP
冰醋酸, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
甲醛 溶液, meets analytical specification of USP, ≥34.5 wt. %
Supelco
甲醛 溶液, stabilized with methanol, ~37 wt. % in H2O, certified reference material
Supelco
乙酸, analytical standard
Sigma-Aldrich
乙酸, ≥99.5%, FCC, FG
Sigma-Aldrich
乙酸, natural, ≥99.5%, FG
Sigma-Aldrich
甲醛 溶液, tested according to Ph. Eur.
Supelco
氯仿, analytical standard
Sigma-Aldrich
乙酸, glacial, puriss., 99-100%
Sigma-Aldrich
吲哚美辛, meets USP testing specifications