跳转至内容
Merck
CN
  • Lifetime, mobility, and diffusion of photoexcited carriers in ligand-exchanged lead selenide nanocrystal films measured by time-resolved terahertz spectroscopy.

Lifetime, mobility, and diffusion of photoexcited carriers in ligand-exchanged lead selenide nanocrystal films measured by time-resolved terahertz spectroscopy.

ACS nano (2015-02-04)
Glenn W Guglietta, Benjamin T Diroll, E Ashley Gaulding, Julia L Fordham, Siming Li, Christopher B Murray, Jason B Baxter
摘要

Colloidal semiconductor nanocrystals have been used as building blocks for electronic and optoelectronic devices ranging from field-effect transistors to solar cells. Properties of the nanocrystal films depend sensitively on the choice of capping ligand to replace the insulating synthesis ligands. Thus far, ligands leading to the best performance in transistors result in poor solar cell performance, and vice versa. To gain insight into the nature of this dichotomy, we used time-resolved terahertz spectroscopy measurements to study the mobility and lifetime of PbSe nanocrystal films prepared with five common ligand-exchange reagents. Noncontact terahertz spectroscopy measurements of conductivity were corroborated by contacted van der Pauw measurements of the same samples. The films treated with different displacing ligands show more than an order of magnitude difference in the peak conductivities and a bifurcation of time dynamics. Inorganic chalcogenide ligand exchanges with sodium sulfide (Na2S) or ammonium thiocyanate (NH4SCN) show high mobilities but nearly complete decay of transient photocurrent in 1.4 ns. In contrast, ligand exchanges with 1,2-ethylenediamine (EDA), 1,2-ethanedithiol (EDT), and tetrabutylammonium iodide (TBAI) show lower mobilities but longer carrier lifetimes, resulting in longer diffusion lengths. This bifurcated behavior may explain the divergent performance of field-effect transistors and photovoltaics constructed from nanocrystal building blocks with different ligand exchanges.

材料
产品编号
品牌
产品描述

Sigma-Aldrich
1-十八烯, technical grade, 90%
Sigma-Aldrich
油酸, technical grade, 90%
Sigma-Aldrich
油酸, ≥99% (GC)
Sigma-Aldrich
硒, powder, −100 mesh, 99.99% trace metals basis
Sigma-Aldrich
油酸, BioReagent, suitable for cell culture
Sigma-Aldrich
三正辛基膦, 97%
Sigma-Aldrich
四丁基碘化铵, reagent grade, 98%
Sigma-Aldrich
硒, powder, −100 mesh, ≥99.5% trace metals basis
Sigma-Aldrich
三正辛基膦, technical grade, 90%
Sigma-Aldrich
油酸, natural, FCC
Sigma-Aldrich
油酸, meets analytical specification of Ph, Eur., 65.0-88.0% (GC)
Sigma-Aldrich
四丁基碘化铵, ≥99.0% (AT)
Sigma-Aldrich
1-十八烯, ≥95.0% (GC)
Supelco
油酸, analytical standard
Sigma-Aldrich
硒, pellets, <5 mm particle size, ≥99.999% trace metals basis
Sigma-Aldrich
硒, pellets, <5 mm, ≥99.99% trace metals basis
Supelco
四丁基碘化铵, suitable for ion pair chromatography, LiChropur, ≥99.0%
Supelco
1-十八烯, analytical standard, ≥99.0% (GC)
Supelco
油酸, Selectophore, ≥99%
硒, foil, 25x25mm, thickness 3mm, 99.95%
油酸, European Pharmacopoeia (EP) Reference Standard