跳转至内容
Merck
CN
  • Degradation pathways of low-ethoxylated nonylphenols by isolated bacteria using an improved method.

Degradation pathways of low-ethoxylated nonylphenols by isolated bacteria using an improved method.

Environmental science and pollution research international (2013-08-15)
Yu Zhang, Xin Gu, Jing Zhang, Min Yang
摘要

Nonylphenol ethoxylates (NPEOs) with low ethoxylation degree (NPav₂EO; containing two ethoxy units on average) and estrogenic properties are the intermediate products of nonionic surfactant NPEOs. To better understand the environmental fate of low-ethoxylated NPEOs, phylogenetically diverse low-ethoxylated NPEO-degrading bacteria were isolated from activated sludge using gellan gum as the gelling reagent. Four isolates belonging to four genera, i.e., Pseudomonas sp. NP522b in γ-Proteobacteria, Variovorax sp. NP427b and Ralstonia sp. NP47a in β-Proteobacteria, and Sphingomonas sp. NP42a in α-Proteobacteria were acquired. Ralstonia sp. NP47a or Sphingomonas sp. NP42a, have not been reported for the degradation of low-ethoxylated NPEOs previously. The biotransformation pathways of these isolates were investigated. The first three strains (NP522b, NP427b, and NP47a) exhibited high NPav₂EO oxidation ability by oxidizing the polyethoxy (EO) chain to form low-ethoxylated nonylphenoxy carboxylates, and then further oxidizing the alkyl chain to form carboxyalkylphenol polyethoxycarboxylates. Furthermore, Sphingomonas sp. NP42a degraded NPav2EO through a nonoxidative pathway with nonylphenol monoethoxylate as the dominant product.

材料
产品编号
品牌
产品描述

Sigma-Aldrich
乙腈, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
甲醇, suitable for HPLC, ≥99.9%
Sigma-Aldrich
甲醇, ACS reagent, ≥99.8%
Sigma-Aldrich
二氯甲烷, suitable for HPLC, ≥99.8%, contains amylene as stabilizer
Sigma-Aldrich
甲醇, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
二氯甲烷, contains 40-150 ppm amylene as stabilizer, ACS reagent, ≥99.5%
Sigma-Aldrich
二氯甲烷, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains 50-150 ppm amylene as stabilizer
Sigma-Aldrich
甲醇, HPLC Plus, ≥99.9%
Sigma-Aldrich
正己烷, suitable for HPLC, ≥97.0% (GC)
Sigma-Aldrich
乙腈, ACS reagent, ≥99.5%
Sigma-Aldrich
正己烷, ReagentPlus®, ≥99%
Sigma-Aldrich
二氯甲烷, anhydrous, ≥99.8%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
正己烷, suitable for HPLC, ≥95%
Sigma-Aldrich
乙酸铵, ACS reagent, ≥97%
Sigma-Aldrich
乙腈, anhydrous, 99.8%
Sigma-Aldrich
甲醇, anhydrous, 99.8%
Sigma-Aldrich
乙酸铵, ≥99.99% trace metals basis
Supelco
乙酸铵, LiChropur, eluent additive for LC-MS
Sigma-Aldrich
正己烷, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥99% (GC)
Sigma-Aldrich
乙腈, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
正己烷, HPLC Plus, for HPLC, GC, and residue analysis, ≥95%
Sigma-Aldrich
乙腈, ≥99.9% (GC)
Supelco
N,O-双(三甲基硅)三氟乙酰胺(含三甲基氯硅烷), derivatization grade (GC derivatization), LiChropur, contains 1% TMCS, 99% (excluding TMCS)
Sigma-Aldrich
甲醇, Laboratory Reagent, ≥99.6%
Sigma-Aldrich
甲醇, suitable for HPLC, gradient grade, suitable as ACS-grade LC reagent, ≥99.9%
Sigma-Aldrich
甲醇, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8% (GC)
Sigma-Aldrich
三甲基氯硅烷, ≥98.0% (GC)
Sigma-Aldrich
二氯甲烷, puriss. p.a., ACS reagent, reag. ISO, ≥99.9% (GC)
Supelco
N,O-双(三甲基硅)三氟乙酰胺(含三甲基氯硅烷), with 1% trimethylchlorosilane, derivatization grade (GC derivatization), LiChropur
Sigma-Aldrich
二氯甲烷, ACS reagent, ≥99.5%, contains 40-150 ppm amylene as stabilizer